controller switch. The power indicator of the remote controller will be
on.
5.
Close the left and right bottom compartment plate of the middle
compartment and put the bait in. When the middle compartment door is
remotely opened, the warning indicator will flicker.
6.
After turning on the boat switch, the front and rear lights of the boat will
flicker three times, then test the functions of the remote controller. If it is
normal, place the boat into the water and start to use it.
7.
After use, please turn off the switch on the remote controller and the
boat.
2. Operation instruction of remote controller
The standard remote controller is operated as follows:
Operation instructions of the remote controller:
1.
Control the opening of the bait hopper by using the left rocker of the
remote controller. Dial left to open the left bait hopper, dial right to open
the right bait hopper, dial down to open the both left and right bait hoppers
at the same time.
2.
Control the boat on the water level by using the right rocker of the remote
controller. Dial up to move forward, dial down to move back, dial left to
turn left at the origin, dial right to turn right at the origin, dial left up to turn
left, and dial right up to turn right.
