Troubleshooting method: Turn on the course auto-adjust function; Calibrate the
right rocker of GPS remote controller ( Follow the instructions of remote
controller) and Check or replace the propeller.
3. The boat stops in the water due to an unknown reason, the light keeps
flickering and the remote controller does not work.
Reasons: (1) The remote control distance is exceeded (2) The power of the remote
controller is not turned on or the power is low (3) The antenna is not installed in
place or the antenna is damaged
Troubleshooting method: Check the power of the remote controller, replace the
batteries, hold the antenna of the remote controller high to the sky, move the
remote controller to the boa, and check and replace the antenna.
4. The bait hopper door cannot be opened.
Reasons: (1) The electromagnet line has fallen off (2) The electromagnet is
damaged (3) The main control board is damaged
Troubleshooting method: Check the line, replace the electromagnet and main
control board.
5. The boat is out of control in the water and the lights and other functions work
normally.
Reasons: (1) The motor is wound with the fish lines or water weeds (2) The main
control board is protected due to overload.
Troubleshooting method: Stop operation, cool the motor and main control board
for several minutes, and then operate it. If the sailing function still cannot be
controlled, take back the boat and check if the propeller is clean.
6. The water enters the boat compartment.
Reasons: (1) The battery port is not covered well or the adhesive tape is damaged
(2) The water seal of the tail shaft is damaged
Troubleshooting method: Remove the water, ventilate the boat for dryness, check
the boat and air tightness of the battery port, check air tightness of the tail shaft,
and contact with the after-sale personnel.
