function can be enabled. When more than 15 satellites are available
and the boat is located in an open area without any obstacle, the
positioning precision can reach about 1m.
2.
Every time the boat arrives at the fishing place, please first set
the origin to ensure that the boat can automatically return to the
origin in case of an emergency. It is recommended to set the origin at
the water surface several meters away from the bank. The automatic
driving function should be enabled at the origin. The bow should
point to the extensive water surface as much as possible to prevent
the boat from stranding on the bank during automatic steering.
3.
When the boat cannot receive the signals from the remote controller
or the boat power reduces to the minimum warning value, the boat
will automatically enable the returning function and return to the
origin. The right rocker should be located on the middle position in
automatic return. Otherwise, it will interfere with normal return.
Four lights will continuously flicker during automatic return.
4.
When the power of the remote controller is consumed up or the
remote control function fails, please turn off the power of the remote.
The boat will automatically enable the returning function and return
to the origin after 7s. Four lights will continuously flicker during
automatic return.
5.
When the boat power reduces to about 30%, the red power indicator
of the boat will be on and you can continue using the boat for about
15 minutes. When the power reduces to about 20%, the remote
controller will give out the power alarm and the red power indicator
of the boat will begin to flicker. At this time, the boat may enable
automatic returning function. You should stop using the boat
immediately and charge it.
6.
The remote controller should be powered by high-quality AA-sized
batteries. When the power of the remote controller reduces to 30%,
