IV. Operation guidance
1. Boat installation and operation instruction
The boat functions are described as follows:
Installation instructions:
1.
First open the battery compartment covers, take the two batteries from
the foam box, place them into the battery compartment of the boat
respectively. Please place the battery into the middle battery
compartment (with the logo facing upwards) when only using one
battery. Please place the batteries into the left and right battery
compartments when using two batteries (push down and fix the batteries
with the logo facing upwards). Then connect the battery power lines at
two ends respectively, and close the battery compartment cover.
2.
Take out the boat antenna, fasten it clockwise, and fix it onto the boat
antenna seat.
3.
If nesting is required on the left and right side of the middle
compartment, insert the division plate of the middle compartment into the
front and rear slot of the compartment and fix it.
4.
To use the remote controller, place four AA-sized batteries, return all the
rockers of the remote controllers to the origin and turn on the remote
