background image

8

coldspot

hotspot

center

c. - Free storage space Micro SD

Here you can see how much MB is still available on the Micro SD card (if placed).

d. - Color palette

There are 5 different color settings for the thermal image on the Tempviewer3600. To 

set the preferred pallet press the “Power / Menu key”. Move with the Navigation but-

tons 

~

 and 

€

 To the “Color pallet” option 

(d) 

and confirm with the “Select / Enter key”. 

Choose with the Navigation buttons 

~

 and 

€

 the desired color palette and confirm 

with the “Select / Enter key”

e. - Emissivity

The emissivity values   of the Tempviewer3600 are adjustable from 0.10 to 1.00.

Look for the correct value in the table. In case of doubt, set the emissivity value to 

0.95. To set the emissivity, press the “Power / Menu key”. Move with the Navigation 

buttons 

~

 and 

€

 To the “Emissivity Value” 

(e)

 option and confirm with the “Select / 

Enter” key. Use the Navigation buttons 

~

 and 

€

 to select the desired emissivity factor 

and confirm with the “Select / Enter key”.

f. - Indicates Min./Max.-value

To display these minimum and maximum values, press the “Power / Menu key” and 

move with the Navigation buttons ~ and ?? To the setting “Min./Max.value” 

(f) 

and 

confirm with the “Select / Enter” key. Use the Navigation buttons ~ and ?? To turn the 

option on / off and confirm with the “Select / Enter key”.

g. - Ambient temperature

The unit takes into account the ambient temperature. The temperature of the space 

can be read here.

Содержание TEMPVIEWER3600













Отзывы: