Additional function / Wireless S.BUS servo setting
V2.0
)XWDED6%866%867KH
"
6%86VHUYR
"
IXQFWLRQ,QVWUXFWLRQPDQXDOSDJHWKDWDOORZV\RXWR
FKDQJHWKHVHUYRSDUDPHWHUVFDQQRZEHVHWXSZLUHOHVVO\E\FRQQHFWLQJWRWKHUHFHLYHU
$UHFHLYHUFRPSDWLEOHZLWKWKHZLUHOHVVVHWWLQJIXQFWLRQLVUHTXLUHG$VRI$SULO56%656%6(LVFRPSDWLEOHZLWK
ZLUHOHVVVHWWLQJ3OHDVHXSGDWHWKHSUHYLRXVUHFHLYHUWRYHUVLRQRUODWHU
1
Set the RF type to T-FHSS system type and link transmitter and receiver.
(Refer to instruction manual pages 37 to 38)
How to check the receiver software version
2
When the link is completed, power cycle the receiver.
You can check the software version on the receiver screen.
After confi rmation, reconfi gure the system to be used as per normal and link again.
Please update the receiver to below version 2.0.
Connection channel of servo to make wireless setting
WARNING
In the wireless setting, there is a danger that a car (boat) can become unexpectedly uncontrollable, because
the servo temporarily stops working during communication. For safety, in case of electric car (boat), please set
with driving wheel (boat propeller) not touching the road surface (water surface). Also, in the case of an internal
combustion engine car (boat), be sure to stop the engine before entering wireless set-up mode.
NOTE:
)RUVDIHW\UHDVRQVLWLVQRWSRVVLEOHWRFKDQJHEHWZHHQQRUPDOPRGHDQG65PRGHZLWKZLUHOHVVVHW
WLQJ7RFKDQJHWKHPRGHFRQQHFWWKHVHUYRWRWKHFRPPXQLFDWLRQSRUWDQRZHYHUIRUVHUYRV
VHWWR65PRGH656565FDQEHVZLWFKHGE\ZLUHOHVVVHWWLQJ
:LUHOHVVVHWWLQJFDQQRWEHXVHGLIDGHYLFHWKDWFRQYHUWVVLJQDOVVXFKDVJ\URDQG)68)DLOVDIH8QLW
HWFDUHFRQQHFWHGEHWZHHQWKHUHFHLYHUDQGWKHVHUYR
Receiver software version
Connect the S. BUS / S. BUS 2 servo as shown in the fi gure and the receiver battery to
the channel of the receiver.
Wireless 2 (Rx Ch2)
Wireless 1 (Rx Ch1)
- Reference
When using "S.BUS / S.BUS2" servo with
steering mixing (Instruction manual page
103) with a twin servo specification car
such as 1/5 GP car, in the channel setting
function (Instruction manual page 75), 1st
channel and 2nd channel are set to steer-
ing, both servos can be wirelessly set.
HOME Menu
Linkage
menu
Receiver
Home button
· Set for T-FHSS system
· Link with link button
