172
＜ Data ＞
Setting by curve type
When the curve type is selected as described above, adjustment items corresponding to the curve type
appear on the screen. Adjust each curve as described below.
[Offsetting the curve horizontally in the
vertical direction]
1. Tap to the [Offset] setting item.
2. Move the curve in the vertical direction
by "
ʈʈ
" "
ʈ
" "
ʆ
" "
ʆʆ
" button.
Initial value: +0.0
(When the value is tapped, the rate is reset to the initial
value.)
EXP1/EXP2 curve adjustment
(EXP1 curve)
U s i n g t h e E X P 1 c u r v e i s e ff e c t i v e i n
smoothing starting of the ailerons, elevator,
rudder, etc.
(EXP2 curve)
Using the EXP2 curve is effective in engine
rise and other engine control.
The curve left and right rates ([Rate A], [Rate
B]) and EXP curve rate ([EXP A], [EXP B]) can
be adjusted individually. ([EXP] for EXP2)
The curve can also be offset horizontally
([Offset]) in the vertical direction.
[Rate setting]
1. Tap to the [Rate A], [Rate B], [EXP A], or [EXP
B] setting item.
2. Set the rate by "
ʈʈ
" "
ʈ
" "
ʆ
" "
ʆʆ
" button.
Initial value: +100.0
(rate)/+0.0
(EXP
rate)
*Initial value differs depending on function.
Adjustment range: -200.0~+200.0
(rate)/-
100.0~+100.0
(EXP rate)
(When the value is tapped, the rate is reset to the initial
value.)
*
[Separ.] mode:
Normal setting
*
[Comb.] mode:
Creates a left and right
symmetrical curve.
