130
＜ Model menu (Airplane/Glider/Multicopter Functions) ＞
AIL 3
(Chip Aileron)
AIL 4
(Chip Aileron)
AIL1
(Main Aileron)
AIL 2
(Main Aileron)
FLP 2
(Camber Flap)
FLP 1
(Camber Flap)
AIL → Camber flap
[Corresponding model type]: Airplane/
glider, 2 ai 2
Á
aps or more
This mix operates the camber flaps (FLP1/2)
in the aileron mode. When the aileron stick
is manipulated, the ailerons and camber flaps
perform aileron operation simultaneously and
the operation characteristic of the roll axis is
improved.
ŏ
The aileron left/right mixing rate of each
Á
ap servo
can be
À
ne-tuned.
ŏ
A mixing curve can be set.
ŏ
An ON/OFF switch can be set.
ŏ
Linking is possible: Link this mix to other mixes.
Adjustment of each
flap servo
Setting method
ŏ
Tap [INH].
(ON is displayed.)
ŏ
When setting a switch, tap the [--] item of
the switch and tap the screen to call the
selection screen, and then select the switch
and set its ON direction. (Always ON at "--"
setting)
(For a description of the switch selection
method, see the description at the back of
this manual.)
ŏ
Tap the left or right item of each
Á
ap servo.
Adjust the mixing rate.
*When the mixing direction is reversed by the linkage,
adjustments can be made by changing the mixing rate
SRODULW\RU
ŏ
A mixing curve can be set. (1/2 page)
(For a description of the mixing curve setting
method, see the description at the back of
this manual.)
ŏ
To set linking, tap the [Link] item.
Set it to ON and tap the screen.
ŏ
Select [AIL
ń
Camber flap] at the
model menu and call the setup
screen shown below.
Currently selected condition name
● Mixing curve setting
(For a description of the
setting method, see the
description at the back
of this manual.)
Left/right overall
adjustment at Rate A
and Rate B
Activate the function by
tapping the [INH].
Condition group/single
mode selection (Gr. /Sngl)
The ON/OFF switch of
mixing is chosen.
To set linking, tap to
the [OFF] item
ŏ
Return to Model menu
