FUTABA 9ZAP - PART2, Руководство пользователя

Страница: 62 / 78

Sailplane Section
SPEED FLAP-AlLERON MIXING—4-S
This mixing is used to make the ailerons oper-
ate together as speed flaps. When the speed flaps
are deployed, the speed flaps and ailerons all
perform the speed flap operation simultaneously.
The mixing rates for up and down speed flap
movement can be set independently. You may also
set up a switch for switching this mixing on and
off during flight. If this mixing is activated with-
out defining an ON/OFF switch, mixing remains
on all the time.
Activation of Speed Flap-Aileron Mixing
In the Condition Menu, press the SPF key to get the
SPEED FLAP menu. Press the B key to get the SPF TO
AIL menu shown below.
Mode setting
Mixing
Rate
Setting
To On/Off Switch
Setting Menu
Return To Speed
Flap Mixing Menu
Mode Selection Keys
Use the A key to activate mode setting, then press
the ACT or INH keys ( F and G ) to activate or
inhibit speed flap coupling.
Setting the Down Speed Flap Mixing Rate
Press the C key, and then set the down aileron mix-
ing rate with the numeric keys E to M . The initial value
is +50% and the setting range may vary from -100 to
+100%.
ON/OFF Switch Setting
On initial setting, an activation switch for speed flap-
aileron mixing is not set, meaning that once activated, it
is on all the time. If you would like to set a switch to turn
it on and off, display the switch setting screen by pressing
the SWT P key, and use the keys to choose the switch
and ON direction you want. For a description of the
switch setting method, see page 37.
Up Speed Flap Mixing Rate Setting
Press the D key and set the up aileron mixing rate
with the numeric keys E to M . The setting range may
vary from -100 to +100% and the initial value is+50%.
Sailplane Section, Page 138