FUTABA 9ZAP - PART2, Руководство пользователя

Страница: 33 / 78

Helicopter Section
HOVERING OFFSET (HOF)
This function is used to program the pitch mix-
ing hovering point. It is used to set the HIGH/
LOW side switching point to the pitch hovering
point when the pitch hovering point has drifted
above or below the stick neutral position. The
model should be adjusted so that hovering is per-
formed around the mid-throttle position.
Activation of command
In the Condition Menu, press the HOF key to get the
HOV OFFSET menu shown below.
"HOV" appears when the stick is at hovering point
Offset setting
Return to
condition menu
Rate setting keys
Setting Method
Offset setting
During flight, make a note of where the throttle stick
is positioned during hover. Set the throttle stick to the
hovering position and adjust the offset with the F and
G keys until "HOV" is displayed on the screen. This
function has a range of -30 to +30%, and its initial value
is0%.
Helicopter Section, Page 109