92
＜
Linkage Menu
＞
HELI
COPTER
AIRPLANE
GLIDER
●Return to Linkage Menu
● Touch the [Throttle Cut] button in the Linkage Menu to call the
setup screen shown below.
Throttle Cut
Stops the engine safely and easily. (Airplane
and helicopter only)
(The display screen is an example. The screen depends on the model type.)
Throttle cut provides an easy way to stop the engine, by
lipping a switch with the throttle stick at idle. The action
is not functional at high throttle to avoid accidental
dead sticks. The switch’s location and direction must be
chosen, as it defaults to NULL.
Throttle cut setting procedure
1. To set up throttle cut in conditions, select the
condition number and touch the "INH" button.
2. Throttle cut function switch setting:
Touch the "NULL" button to call the <Switch>
screen, and then select the switch and its ON
direction.
(For a detailed description of the selection
method, see [Switch Setting Method] at the
back of this manual.)
3. Throttle cut position setting:
Set the throttle stick to maximum slow, and
touch the cut Position button. Adjustment
buttons appear. At the same time, the
numerical value of the current maximum
slow side is displayed at "Cut Position".
Use the adjustment buttons to adjust the
servo travel when the throttle cut function is
activated.
●Initial value: 17%
●Adjustment range: 0%~50%
*With throttle stick at idle, adjust the rate until the
engine consistently shuts off, but throttle linkage
is not binding. When finished, touch the
"
Throttle
Cut
"
button to exit.
To exit the setting, touch the [Throttle Cut]
button.
Note:
When conditions are set, at Throttle cut setup can
be performed for each condition. Throttle cut can only be
activated in a speciic condition if you have selected and set
up this function within the condition. When using throttle
cut in a speciic condition, and ON or active. If you change
to another condition, throttle cut is canceled and no longer
active in the irst condition, as long as the second condition
does not have throttle cut active.
Cut
Switch
Cut
Idle
Содержание 32MZ
Страница 1: ...1M23Z06801 INSTRUCTION MANUAL...
