5
System Components
Stenner Proportional Injection System Specifications
The Stenner Proportional Injection System delivers precise dosing
proportional to the system's flow rate based on water volume.
The Stenner system is perfectly suited for constant pressure (variable speed) well pumps, poultry and
livestock houses, irrigation, systems with demand based backup wells and any
application
with varying
flow rates
The primary components are the Stenner Pump Control Module, Stenner Classic Series Fixed Output Pump and a
dry contact pulsing Water Meter. The Stenner Pump Control Module is a time adjusted controller that powers the
pump. A pulsing water meter sends a signal to the Stenner PCM which actuates the pump to deliver the desired
dose based on water volume. The Stenner PCM has a locking dial to assure the accuracy of the dosage. The
Stenner Proportional Injection System can be utilized to inject any number of chemicals including chlorine,
hydrogen peroxide, polyphosphate, Rid-O-Rust and many other chemicals.
The Stenner Proportional Injection System includes brackets to easily mount the panel to the wall for timely
installations and equipment accessibility. It is completely "plug and play." Simple to install, even simpler to set.
Available in 120V, accommodates 3/4" or 1" piping. Just plug into any electrical outlet, intercept a 3/4" or 1" line
and connect it and you are done. It's that simple.
Flows up to 22 GPM
Panel & panel fittings: Polyethylene
Mounting hardware: Stainless steel
Piping and associated fittings: PVC
Water meter: bronze
Filter: PVC with polycarbonate cover and two polyester screens 30 and 100 mesh
Note: Connections are socket weld union ¾” connections
Dimensions: 36 x 23 x 11 in.
Shipping Weight: 31 lbs
Installation, Operation and Maintenance Manual
Oxi-Gen Oxi-2P,3P,4P, 5P & 6P System
