Furuno FM-8800, Руководство по обслуживанию, Страница: 120 / 268

4.4 System Setting: Option Menu
4-24
4.4.5 CH MODE
This is to set up ON/OFF for INTL, USA/WX, CANADA, INLND and PRIV mode.
You can switch the mode by pressing [SHIFT] -> [7: INTL/USA]. The mode set up by
CH CONFIG. has to be set to ON in order for it to be available in this mode setting.
MODE
INTL : ON
USA/WX : OFF
CANADA : OFF
INLND : OFF
PRIV : OFF
Procedure
1. Select [MENU] -> SYSTEM -> CH MODE.
2. Bring a cursor onto a mode to setup and press [ENT] key to set up “ON/OFF”.
4.4.6 SCAN/DW
This is ON/OFF setting for SCAN and Dual Watch.
Dual Watch
1. Receives CH16 and Additional Channel to watch alternately at the above timing.
2. LCD channel indication is changed at the same timing.
3. When receiving CH16 during Dual Watch, it is locked. Dual Watch function resumes
5 seconds after a signal is lost.
4. Even if receiving Additional Channel, it receives alternately at the above-mentioned
timing.
5. Set PTT switch of Handset to ON or press [SHIFT] -> [9: DW] key by turns. Dual
Watch function stops.
Additional Channel
ex: CH06
CH16
T=150 ms
T=1000 ms
ON/OFF
[ENT]
INLND:
When ATIS ID is registered, ON/OFF
is available.