Furuno FM-8800, Руководство по обслуживанию

Страница: 111 / 268

4.3 System Setting: User Menu
4-15
Procedure
1. Select [MENU] -> AUTO ACK and press [ENT] key.
2. Select COMPLY STATUS and set up either ABLE or UNABL. And then, press
[ENT] key.
3. When setting UNABL setting, select UNABLE REASON.
2. POSITION CALL, POLLING CALL
Both factory settings are ON.
POSITION CALL
When POSITION CALL is ON, BQ message (includes the own ship’s position
data) is automatically transmitted in response to POSITION CALL from other
ships. Your own ship’s position is the one indicated on the display.
POLLING CALL (Cannot use in Russian Ver.)
POLLING is to see if you are in a communicable range with other ships. If
POLLING CALL is ON, your BQ message (not include the own ship’s position
data) is automatically transmitted in response to incoming Polling Calls from other
ships.
4.3.3 MEMORY CHANNEL
To call up a registered channel, switch the mode by [SHIFT] -> [7: INTL/USA].
“MEMO xx” will be indicated on the mode indication part.
How to operate MEMORY CHANNEL:
1. The maximum of 50 channels are available.
2. The only modes that can be registered is the ones chosen by [MENU] -> SYSTEM
-> CH MODE. After a registration, even if CH MODE is prohibited, you can call
up a registered channel mode.
3. Memory channel is reflected in the state of channels (TRX, DUP/SIMP and TX
POWER) set up by [MENU] -> SYSTEM -> CH CONFIG.
* SETUP MENU *
ALARM
AUTO ACK
ERASE LOG
MEMORY CHANNEL
MESSAGE FILE ENTRY
* AUTO ACK MENU *
COMPLY STATUS ABLE
UNABLE REASON
NO REASON
POSITION CALL ON
POLLING CALL ON
ABLE
UNABLE
[ENT]
[ENT]
NO REASON
BUSY
EQUIP DISBLD
MODE UNAVAIL
CH UNAVAIL