Furuno FI-70, Руководство оператора

Страница: 57 / 98

4. SYSTEM MENU
4-13
[ICOM AIS Data]
Select [Yes] to use the AIS data output from a AIS transponder manufactured by
ICOM.
4.10 How to Set the Data Source(s)
The FI-70 automatically detects and connects to data sources within the network.
These settings can be changed as required by doing the following:
1. Access the [System] menu using the procedure outlined on page 4-1.
2. Press the
software keys to select [Data Source], then press the function key.
3. Press the software keys to select the appropriate source, then press the function
key.
4. Press the software keys to select the appropriate sensor, then press the function
key.
5. Repeat the procedure to adjust other sensor’s settings as necessary.
6. Press the
Menu/Back key twice to close the menu.
Automatic data source switching
The FI-70 can automatically switch data sources if data from the set source is
interrupted or lost, provided there is a suitable sensor connected to the same network
as the FI-70.
AIS and all tank sensors are not switched automatically.
Source Description
[Position] Data source for position related information (GPS, etc.)
[Heading] Data source for heading related information
[STW] Data source for Speed Through Water
[SOG] Data source for Speed Over Ground
[Navigation] Data source for navigation
[Depth] Data source for depth
[Water Temp.] Data source for water temperature
[Wind] Data source for wind angle/speed
[AIS] Data source for AIS related information
[Heave] Data source for heave information
[3-Axis Speed] Data source for 3-Axis speed
[Roll/Pitch] Data source for roll and pitch information
Data Source
Position:
Heading:
STW:
SOG:
Ent
----------------
----------------
----------------
SC-30 :000200
SC-30 :000200