Furuno FI-70, Руководство оператора

Страница: 53 / 98

4. SYSTEM MENU
4-9
4.6.2 How to test the IF-NMEAFI
1. Access the [System] menu using the procedure outlined on page 4-1.
2. Press the
software keys to select [IF-NMEAFI], then press the function key.
3. [Select IF] is already selected, press the function key.
4. Press the software keys to select the appropriate IF-NMEAFI unit, then press the
function key.
5. Press the software keys to select [IF-NMEAFI Test], then press the function key.
The diagnostic results screen for the selected IF-NMEAFI unit is displayed.
6. Press the Menu/Back key at any time to close the results screen.
7. Press the Menu/Back key twice to close the menu.
4.6.3 How to reset the IF-NMEAFI to factory default settings
1. Access the [System] menu using the procedure outlined on page 4-1.
2. Press the
software keys to select [IF-NMEAFI], then press the function key.
3. [Select IF] is already selected, press the function key.
4. Press the software keys to select the appropriate IF-NMEAFI unit, then press the
function key.
5. Press the software keys to select [Refresh], then press the
function key. The confirmation pop-up window shown to
the right is displayed.
6. To abandon the reset, press the right software key. Press
the left software key to reset the factory default settings.
The IF-NMEAFI will now restart, restoring all factory settings and the message
shown to the above right appears.
7. Press the Menu/Back key twice to close the menu.
IF-NMEAFI Test
ROM:OK 1451463-xx.xx
1451462-xx.xx
RAM:OK Backup:OK
ROM Program numbers. “xx” denotes
version number.
ROM : Result displayed as OK or NG (No Good)
RAM : Result displayed as OK or NG (No Good)
Backup : Result displayed as OK or NG (No Good)
Refresh IF-NMEAFI
setting.
Are you sure?
Please wait a moment.