manualshive.com logo in svg

Furuno FCR-2119-BB, Руководство по эксплуатации

Поделиться
Скачать
Furuno FCR-2119-BB Скачать руководство пользователя страница 188

5.  RADAR MAP AND TRACK

5-6

3. Specify the area as follows:

1) Put the cursor on the start point and push the left button.
2) Drag the cursor diagonally to the end point and push the left button.

4. Right-click the display area to show the context-sensitive menu.

5. Click [Area Mark Delete] to delete the marks and lines in the area selected.

5.8.3

How to erase all radar map marks and lines in a map file

You can erase all radar map marks and lines in the map file currently displayed. Be 
absolutely sure you want to erase the marks and lines - erased marks and lines cannot 
be restored.

1. Right-click the [Mark] box, select [Map•Mark Menu] and [1 MARK SETTING].
2. Select [8 MAP MARK ALL DELETE]. The confirmation message "Attention: Do 

you wish to delete all map mark?" appears. Click the [OK] button to erase all 
marks and lines.

3. Close the menu.

Start point

End point

Marks within the area 
are colored light blue

Содержание FCR-2119-BB






























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды