manualshive.com logo in svg

Furuno DFF-3D, Руководство оператора

Поделиться
Скачать
Furuno DFF-3D Скачать руководство пользователя страница 12

1.  INSTALLATION

1-2

1.2

How to Install the Sonar

This sonar can be installed on a deck or on a bulkhead. When selecting a mounting 
location, keep the following points in mind:

•  Install the unit indoors.
•  The operating temperature range of this unit is -15°C to 55°C (-27°F to 99°F). Be 

sure the mounting location satisfies this requirement.

•  Locate the unit away from exhaust pipes and vents.
•  The mounting location should be well ventilated.
•  Mount the unit where shock and vibration are minimal.
•  Keep the unit away from electromagnetic field-generating equipment such as mo-

tors and generators.

•  Observe the minimum recommended maintenance space shown in the outline 

drawing at the back of this manual. Also, leave slack in cables for maintenance and 
servicing ease.

•  A magnetic compass may receive interference if it is placed too close to this unit. 

Observe the compass safe distances noted in the safety instructions to prevent in-
terference to the magnetic compass.

•  For mounting on a bulkhead, the connectors must face downward.

Fasten the unit to the mounting location with four self-tapping screws (5×20, supplied), 
referring to the outline drawing at the back of this manual for mounting dimensions.

Содержание DFF-3D












































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды