Termination Instructions
20
NOTE:
It is critical to fully insert the connector into
the positioner plate. Failure to do so, may
cause poor cleave quality and/or damage to
the diamond blade.
NOTE:
Do not hold onto the connector during the
cleave process. Doing so may cause poor
cleave quality.
STEP
9
Cleave Fiber
continued
• Holding the CLEAVING TOOL in a horizontal position, grip
the handle while leaving your index finger free to actuate trig-
ger.
• Place the ferrule into the hole of the positioner plate until it is
fully inserted.
• Release the connector in the tool.
