888 438 9936 (US & Canada) or 860 678 0371 | [email protected] | www.SpecialtyPhotonics.com
i
Please Read First
Please make sure to
read
and understand termination in-
structions completely. Improper assembly will cause poor ter-
mination results and cause damage to termination kit
components.
Make sure you
wear
eye protection during the cleaving
process. The bare fiber is sharp and may splinter; handle very
carefully. Make sure fiber is disposed of properly, in a hard-
sided container.
OFS Specialty Photonics Division
warrants
this
termination kit to be free of defects for a period of
90 days from the date of purchase. Each kit is qualified at our
factory prior to shipment. OFS Specialty Photonics Division
will, at their discretion, repair or replace any tools found to be
defective due to workmanship within the stated warranty pe-
riod. (Excludes damage to the fiber stripper, cleave tool, and/or
diamond blade due to misuse.)
OFS Specialty Photonics Division recommends that all re-
placements or repairs be made at our manufacturing facility,
except where specifically outlined. Please
contact
the
sales representative in your region or call the factory for tech-
nical support:
Monday-Friday, 8:00 am-5:00 pm EST.
888-438-9936
[Toll free in the US and Canada]
860-678-0371
[International]
Important Safety and Warranty Information
