Introduction
The Model T23124 24" Bending Brake is ideal for
a small workshop environment where ease of use
is important. The Model T23124 can bend up to
18 gauge (0.0473 in.) mild steel.
Figure 1.
Model T23124 24" Bending Brake.
CopyrighT © AugusT, 2010 By grizzly indusTriAl, inC.
WarnIng: no portIon oF thIs manual may be reproduced In any shape
or Form WIthout the WrItten approval oF grIzzly IndustrIal, Inc.
#Bl13199 prinTed in ChinA
Inventory
(Figure 2)
a.
Bending Brake Assembly ........................... 1
b.
Clamping Angle .......................................... 1
c.
Clamp Assemblies ...................................... 2
d.
Breaker Bar levers ..................................... 2
e.
hardware Bag (not shown)
— hex Bolts M10-1.25 x 30 ........................ 4
— hex nuts M10 ........................................ 4
— lock Washers 10mm ............................. 4
assembly
to assemble your bending brake:
1.
securely mount the bending brake assembly
to a workbench or other stable surface using
8mm hex bolts, flat washers, lock washers
and hex nuts. Mounting hole locations are
indicated in
Figure 3
.
2.
place the clamping angle on the bending
brake assembly.
3.
Mount each clamp assembly as shown in
Figure 4
on the next page. ensure that each
adjustment set screw shown in
Figure 4
is
towards the outside of the bending brake
assembly. secure with hex bolts, lock wash-
ers and hex nuts.
Figure 2.
inventory.
d
B
A
C
Figure 3.
Mounting hole locations (right side of
bending brake not shown).
model t23124
24" bendIng braKe
InstructIon sheet