9 Optional horizontal
stability bar
Parts used:
Ax2
Cx4
Dx2
NOTE: This is an optional
addition to increase stability
where needed. You can do
this as the very last step if
you choose to.
Take the Leg Support Bar
(two pieces of metal that
slide together), and insert
2 x A bolts through the
middle cutout, then fix them
in place loosely using 2 x
D (wing nut). Attach the
stability bar to the mounts
on the desk legs as shown
in the picture. Lastly, tighten
the screws & wing nuts on
the middle of the bar to hold
it tight for stability.
Erection Sequence: 1,2,3
1
1
2
3
2
