NOTE: Turn the desk top upside down and lay flat
on the floor, and put the frame on upside down on
top of it for this part.
If there are 6 x pre-drilled holes on the under side of
desk top, you will need to line up the frame to the
same width as the holes on each side, and attach
using 6 x F bolts.
If you received a Furna table top without predrilled
holes, you will have 6 extra wood tapping screws
that can easily be drilled in to attach the desk top. In
this case, set the frame width to your chosen setting
(near to the edges of the table top).
8 Desk top installation
Parts used:
F
Qtyx6
