2
3
Installation preparation:
Lower legs to minimum
height
Frame mount installation:
Connect the Frame shoulder
support to the top of each
leg as shown in picture. You
will need to use 4 x bolt A to
do this for each leg. NOTE:
only connect on the sides,
not the ends.”
Use the crank handle (J)
to insert directly in to the
heads of the two legs to
wind them down to their
lowest position. Do not
wind hard, just until there
is resistance meaning they
are at the bottom. NOTE:
Remove handle after this is
done, as it will be installed
elsewhere in a later step.
Handle
Qty x 1
Part A
Qtyx8
Parts used:
