7
3.
If the game clock is being used, set the desired length of each period with the
and
buttons. The period length can be preset in 5 second intervals up to 1 minute, then 1 minute 30
seconds, and then in 1-minute increments from 2 to 99 minutes. All periods (except overtime and
halftime) will start with this time and will be stored in the scoreboard even after power is turned off.
The ability to set the length of the current period is disabled once the period has started.
4.
The possession arrows can be enabled or disabled at any time before or during a game. Hold the
button for approximately 3 seconds to disable the possession arrows. Press this button
any time to re-enable them. With the arrows enabled, each press of this button will toggle the
possession arrows.
5.
The scoreboard horn can be configured to automatically sound for different conditions (aside from
manually sounding it with the ‘HORN’ button). The game clock must be enabled for the
automatic horn sounding to be enabled:
Press and hold the
button for 3 seconds to cycle through each of the three modes
described below.
HORN
MODE
DESCRIPTION OF HORN MODE
INDICATED BY
1
Automatic horn sound disabled – no horn when period
expires or when clock started/stopped
Display blinking
once when selected
2
Horn sounds when period and penalty clock expires (default)
Horn beeps once
3
Horn sounds when clock starts/stops, and when period ends
Horn beeps twice
NOTE: The display may dim or go off while the horn is sounding when the scoreboard is
powered with batteries. This is a sign that the batteries are near the end of their life.
6.
Each press of the
button will start and stop the game clock.
7.
Use the HOME
,
,
, and GUEST
,
, and
buttons to
control the team scores.
8.
Hold the HOME or GUEST
buttons down for 3 seconds to toggle team bonus indicators.
9.
The SNT-140P and SNT-440P scoreboards have the ability to display fouls for each team when
using play mode 1. Simply press the
and
buttons to increment the Home and
Guest team’s fouls, respectively
.
Press and release the
button to clear the fouls display.
10. After approximately 10 minutes of non-use (game clock stopped, no buttons pressed), the
scoreboard display will shut off and the game clock decimal point will blink to indicate the
scoreboard is still on and in power save mode. Pressing any button on the remote will re-awaken
the scoreboard with the previous status of the game play information intact.
11. To adjust the remaining time in a period during game play (i.e., disputed call requiring adding time
back onto the game clock): stop the game clock using the
button and then press the
and
buttons to add or subtract time from the game clock, respectively. Game play
can resume by pressing the
button again. This adjustment will not affect the length of the
remaining periods.
