21
SECTION 10: CHARGING THE WIRELESS KEYPAD
The wireless keypad contains a rechargeable battery. While the charge of the keypad battery will typically
last between 1 to 2 weeks (depending on usage), we recommend charging your keypad the night before
each use of the scoreboard.
The charging indicator will light up orange to indicate the keypad is charging, and will turn green when
fully charged.
Plug keypad charger into 120VAC wall outlet after
plugging charger into keypad
SECTION 11: PAIRING THE WIRELESS KEYPAD AND SCOREBOARD
1. If you are also using the CK-100 or CK-100P corded
keypad, disconnect it from the scoreboard before
continuing.
2.
Cycle the scoreboard power off and on (waiting 3
seconds before each turn-on) until the scoreboard is
displaying the keypad connection screen shown at
right. Make certain only one scoreboard in the vicinity
is showing this display at any given time, otherwise
the pairing process will fail.
(SNT-140P shown for reference)
NOTE:
If the wireless keypad was previously paired to a scoreboard, you must first clear the keypad of
any previous scoreboard connection data to allow it to connect to the scoreboard again. To
clear the keypad’s previous connection information, press and hold the
and
buttons simultaneously until the keypad status light blinks 5 times.
3. Press and hold the
button on the keypad for up to 10 seconds (until the keypad emits a
beep). The scoreboard will go through a process of reconnecting to the keypad and will respond
after a few seconds by displaying the radio channel number. The keypad will beep twice if the
connection is good, or 3 times if the connection failed. Repeat this step if necessary to establish a
connection.
4. After a few seconds the scoreboard will show a normal display.
5. Re-attach the corded keypad (if applicable).
6. Refer to the wrist remote instruction manual for re-pairing the wrist remote to your scoreboard (if
applicable).
