Funkwerk FT4 Скачать руководство пользователя страница 71

Страница: 71 / 151

Operation

Switching on the radio set

Operation

In this chapter, you can familiarise yourself with the operation of the radio set. Fre-
quent operation steps are described on the following pages.

Switching on the radio set

PLEASE NOTE

Operating radio sets may cause disturbances!

Switching on or operating your radio set may cause a hazard to you or to other per-
sons.



Switch on your radio set only if its operation does not expose any persons to a
hazard.



Do not switch your radio set on in places where the operation of radio sets is not
permitted.

Carry out the following work steps:



Press the

‹Hang up›

key long.

The display and keyboard illumination is switched on.

The radio set carries out a self-test. This will take a few seconds.

The radio set is connected with the TETRA infrastructure (if this has been pro-
grammed).

The display shows the idle display.



Done, the radio set is switched on.

Содержание FT4
























































































































































Результаты поиска

Содержание FT4

Отзывы:

Funkwerk FT4, Руководство по эксплуатации, Страница: 71 / 151

Результаты поиска

Содержание FT4

Отзывы: