Funkwerk FT4 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 151

Funkwerk FT4 Скачать руководство пользователя страница 13

Safety information

13

Industry

Canada

Safety information

This chapter contains important warning statements regarding the use of the radio
set and the battery.

FCC

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT
CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE
UNDESIRED OPERATION.

NOTE:   THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR
MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY
RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICATIONS COULD VOID THE
USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules.  These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.  This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.  However, there is no
guarantee that interference will not occur in a particular installation.  If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:



Reorient or relocate the receiving antenna.



Increase the separation between the equipment and receiver.



Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.



Consult the dealer or an experienced radio/TV technician for help.

«
...
11
12
13
14
15
...
»

Содержание FT4
























































































































































Отзывы:

Нет отзывов