Funkwerk FT4, Руководство по эксплуатации, Страница: 35 / 151

Structure and function 31
Control elements
Legend (section 3 of 5)
No. Designation Function
5 Function key 3 Execution of a pre-set function: Press the key to execute
the function.
Depending on the programming of the radio set, one of
the following functions is possible:

No function.

Toggling the operating type between TMO/DMO.
Changing the operating mode is possible only when
the radio set is not logged into a personal emergency
signal centre.

Switching the screen saver on/off.

Confirming a group selected via rotary switch or
menu.

Vertical cursor movements up.

Vertical cursor movements down.
6 PTT (transmit key) Starting and controlling an individual call (direct through)
or a group call:

Press key long for setting up a connection and talking
while the connection is active.

Release key to hear other subscribers.
7 Left softkey Executing the menu function shown in the footer at the
bottom display edge: Press the key for executing the
function displayed directly above the key.
8 Right softkey Executing the menu function shown in the footer at the
bottom display edge: Press the key for executing the
function displayed directly above the key.
9 Cursor keys Changing the selection marking on the display. Press
cursor keys to move the select marking or the cursor to
the left, right, up or down.
10 Picking up The following functions are possible, depending on the
operating situation:

Starting or accepting an individual call in duplex mode
(full duplex voice connection)

Show S
ELECTED NUMBERS
list (automatic redialling
list) in the display.