FunkTronic Major 4a Скачать руководство пользователя страница 22

Страница: 22 / 71

m4a5a_v320_eng (14.02.2013)

- 22 -

Kompetent für Elektroniksysteme

m4a5a_v320_eng (14.02.2013)

- 23 -

Kompetent für Elektroniksysteme

FFSK Encoder

The 5 digits of the producer identification and the call (4

- 8

digit in the 8-digit FFSK telegram)

are treated in the same way as for 5-tone telegrams. The digits that should not be entered via the

keypad are invariably coded. Invariable digits can be located anywhere throughout these 5 digits.

Hence, it is also possible to invariably set digits 4, 6 and 8 of the FFSK telegram. In this case,

digits 5 and 7 areentered via the keypad. Usually, the first 2 digits (producer indentification) or the

first 3 digits (producer identification and first digit of the call) are preset. The digits that are to be

entered by the keypad are always displayed right-justified. The encoder is programmed in register

010 (see section Transmitting of 5-Tone Sequences).

FFSK Decoder

For all telegrams the CMO is checked. If the CMO is consistent with register 091 (digit 2), the

encoder is activated. The encoders are coded in registers 020-029, 030-039 and 040-049 (see

Table of Registers). The recognized telegram is compared to the decoder values, accepting

all values at digits that are programmed with an ‘F’. After a positively recognized telegram, the

loudspeaker and the earphone are switched on, the loudspeaker display flashes, depending on

the settings the FFSK acknowledgement is sent and the alarm tone is activated. An additional

comparison to other decoders is not performed.

Содержание Major 4a








































































Результаты поиска

Содержание Major 4a

Отзывы:

Бренды по названию

Популярные бренды

FunkTronic Major 4a, Руководство пользователя

Результаты поиска

Содержание Major 4a

Отзывы:

Бренды по названию

Популярные бренды