FunkTronic FT 636, Руководство пользователя

Страница: 32 / 38

ft636 (14.10.2013)
- 32 -
Kompetent für Elektroniksysteme
ft636 (14.10.2013)
- 33 -
Kompetent für Elektroniksysteme
In the local network, in different network segments
Major 5a control head
IP Interface
Ethernet
switch
IP Interface
Ethernet
switch
Two-way radio
This example shows a configuration where the FT535 IP Interfaces and therefore the control head
and the two-way radio are in different segments of the network. The segments are connected by a
router. Consequently the network parts of the IP addresses are different in both segments. At first
the two IP Interfaces are connected to the same network segment as the configuration PC. The
necessary data can be obtained from the network administrator.
Example:
Segment Segment 1 Segment.2
Net IP-adddress 192.168.255 172.31.
Net mask 255.255.255.0 255.255.0.0
IP Interface 192.168.255.254 172.31.0.254
Router/Gateway 192.168.255.1 172.31.0.1
The steps to the configuration:
1. Assign a second IP address to the configuration PC (for example 192,168,16.254,see above)
In the example the configuration is to be made in segment 1 (PC and both IP Interfaces)
2. Connect the IP Interfaces to the network (currentless).
3. Switch on the first IP Interface (supply power)
4. Start a browser on the PC
5. Enter „http://192.168.16.191 „ in the address bar of the browser
6. In the now appearing web page choose „configuration 0“ in the mode field. Click on „Apply“ and
switch to the page „Application“.
The page for network configuration will appear.
7. The following fields have to be changed:
local IP address: 192.168.255.254
target IP address 172.31.0.254
network mask 255.255.255.0
standard gateway 192.168.255.1
Click on „Apply“.
8. To check the settings in the browser enter 192.168.255.254 in the address bar, as the IP Inter-
face can now only be reached under the new address.
9. Proceed with the second IP Interface according to steps 2.- 8.
local IP address: 172.31.0.254
target IP address 192.158.255.1
network mask 255.255.0.0
standard gateway 172.31.0.1
Click on „Apply“.
ATTENTION: This IP module now has an IP address from segment 2 and can only be reached via
web browser again after being installed in segment 2.
Router