FunkTronic FT 636, Руководство пользователя

Страница: 14 / 38

ft636 (14.10.2013)
- 14 -
Kompetent für Elektroniksysteme
ft636 (14.10.2013)
- 15 -
Kompetent für Elektroniksysteme
The FT636 IP Interface configuration interface
The configuration of the FT636 is carried out on a website, which is provided by the device. To do
this the IP nterface has to be connected to the network and the configuration PC has to be set up
as described in the previous paragraph.
A browser is started on the PC and the following address needs to be entered in the address bar:
http://192.168.16.191
The following FT636 configuration interface appears:.
This page is shown as standard when the configuration interface is newly opened. You can also
open this page by clicking the menu item „System“.
In the entry field „Mode“ you can switch to different modes of operation. They are used for stan-
dard operation or for configuration of different settings.
For the first implementing choose the mode „FT636 IPI Configuration 0 (TCP/IP, NF, fticfg0)“. Then
click on „Apply“ to switch to this mode. By clicking on „Apply“ the current settings will always be
saved and restarted in order to read the setting into the system.
By now clicking on „Apply“ you can switch to the page for the TCP/IP settings.