FunkTronic FT 635 UELE Скачать руководство пользователя страница 39

Страница: 39 / 40

ft635ule_eng (21.06.2012)

- 38 -

- 39 -

ft635ule _eng(21.06.2012)

Kompetent für Elektroniksysteme

Please read the operating instructions carefully before installation and setup.

The relevant regulations must be complied to when working with 230V line voltage, two-wire-

lines, four-wire-lines and ISDN-lines. It is also very important to comply to the regulations

and safety instructions of working with radio installations.

Please comply to the following safety rules:

- All components may only be mounted and maintained when power is off.

- The modules may only be activated if they are built in a housing and are

scoop-proof.

- Devices which are operated with external voltage - especially mains voltage -

may only be opened when they have been disconnected from the voltage source

or mains.

- All connecting cables of the electronic devices must be checked for damage

regularly and must be exchanged if damaged.

- Absolutely comply to the regular inspections required by law

according to VDE 0701 and 0702 for line-operated devices.

- Tools must not be used near or directly at concealed or visible power lines

and conductor paths and also not at and in devices using external voltage –

especially mains voltage - as long as the power supply voltage has not been

turned off and all capacitors have been discharged. Electrolytic capacitors

can be still charged for a long time after turning off.

- When using components, modules, devices or circuits and equipment the

threshold values of voltage, current and power consumption specified in the

technical data must absolutely be complied to. Exceeding these threshold

values (even if only briefly) can lead to significant damage.

- The devices, components or circuits described in this manual are only

adapted for the specified usage. If you are not sure about the purpose of the

product, please ask your specialized dealer.

- The installation and setup have to be carried out by professional personnel.

Factory returning of old equipment

According to German law concerning electronic devices old devices cannot be disposed off

as regular waste. Our devices are classified for commercial use only. According to § 11 of

our general terms of payment and delivery, as of November 2005, the purchasers or users

are obliged to return old equipment produced by us free of cost. FunkTronic GmbH will

dispose of this old equipment at its own expense according to regulations.

Please send old equipment for disposal to:

FunkTronic GmbH

Breitwiesenstraße 4

36381 Schlüchtern

>>> Important hint:

freight forward deliveries cannot be accepted by us.

February 2

, 2006

Subject to change, Errors excepted

General Safety Instructions

Содержание FT 635 UELE









































Результаты поиска

Содержание FT 635 UELE

Отзывы:

Бренды по названию

Популярные бренды

FunkTronic FT 635 UELE, Руководство пользователя

Результаты поиска

Содержание FT 635 UELE

Отзывы:

Бренды по названию

Популярные бренды