manualshive.com logo in svg

FunkTronic FT 635 UELE, Руководство пользователя

Поделиться
Скачать
FunkTronic FT 635 UELE Скачать руководство пользователя страница 18

ft635ule_eng (21.06.2012)

- 18 -

- 19 -

ft635ule _eng(21.06.2012)

Kompetent für Elektroniksysteme

Kompetent für Elektroniksysteme

There are two different ways of compressing speech. The A-Law compression halves the 

resolution from 16 Bit to 8 Bit and half the Baud rate reduces the sampling rate from 28,8kHz 

to 14,4kHz. For especially long delays both compression methods can be combined. Ex 

factory the operation mode "Simplex (Vox)" and no delay is set.

Reg.  Function

366  1.- 3. digit:  max. transmitting time for Simplex nnn * 1s

366  5. digit: 

operation mode 0=Simplex (VOX), 1=Duplex, 2=Simplex (carrier)

367  1.- 3. digit:  max. receiving time for Simplex nnn * 1s

617  1.- 3. digit:  speech delay telephone > radio nnn * 1ms 

617  4.  digit: compression: 

0 = none (max. 55ms delay time)

 

     1 = A-law (max. 110ms delay time)

 

     2 = half the Baud rate (max. 110ms delay time)

 

     3 = A-law and half the Baud rate (max. 220ms delay time)

When connecting to the telephone network the then required voice announcements to the 

telephone subscriber can be switched if the FT635UELE is additionally equipped with the 

option VMM.

Recording of texts

The recording is controlled by the RS232 and can be made by radio or telephone. Enter 

the text number and the recording source in the monitor command. If you want to  record 

the texts from the telephone, the telephone connection must be set up beforehand. Then 

you start and end the recording with the blank key on the terminal.

The maximum number of texts is  240  and is also limited by the total memory capacity 

of  4  minutes  (240  seconds). The  UELE  only  uses  the  texts  1  and  2.  Ex  factory  both 

announcements have been recorded with the following texts:

Text 1 (with setup telephone --> radio):

„Please wait - the desired subscriber has been called via the public radio network 

(text is in German)

Text 2 (with setup radio --> telephone):

„You are now connected to the subscriber via the public radio network!“(text in German)

When connecting between radio network and telephone network both texts no 1 and no 

2 can be switched to the telephone subscriber as voice announcements.

Reg.  Function

369   3. digit: voice announcement (text 1) with connection setup telephone --> radio

369  4. digit: voice announcement (text 2) with connection setup radio --> telephone

 

     For both digits the following applies:

 

     0 = no voice announcement

 

     1 = during voice announcement no AF audible from the radio

 

     2 = during voice announcement AF from the radio additionally audible

Voice announcement (option)

Содержание FT 635 UELE









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды