FUNAI DDVR-5505V, Руководство пользователя

Страница: 11 / 28

11
EN
Manual Channel Preset
• Use the remote control for this procedure.
1) Press VCR , then MENU .
2) Press
K
or
L
to select “INITIAL”, then press
B
.
3) Press
K
or
L
to select “CH TUNING”, then press
B
.
4) Press
K
or
L
to select “MANUAL”, then press
B
.
5) Press
K
or
L
to select “POSITION”, then press
B
.
•When a weak signal is received in Manual Tuning mode,
you can change the background to solid blue or the
static screen by pressing
C.RESET .
6) Press the number buttons ,
K
or
L
to select your desired
position number, then press
B
.
•You can select position number 01-99.
•If [ON] appears on the right side of “SKIP”, press
K
or
L
to point to “SKIP”. Then, press
B
to select [OFF].
•If you want to remove scrambled signals, press
K
or
L
repeatedly to point to “DECODER”. Then, press
B
to
select [ON].
•If you want to change the video mode, press
K
or
L
repeatedly to point to “VIDEO MODE”. Then, press
B
to select your desired mode.
7) Press
K
or
L
to select “CHANNEL”, then press
B
.
Press
K
or
L
. The DVD/VCR tuner will begin to search
up or down automatically. When a channel is found, the
DVD/VCR will stop searching and the picture will appear
on the TV Screen.
•You can select desired channel number by using
the number buttons . You must refer to the following
Channel Plan table and press three digits to select the
channel number.
(To select channel 24, press “
0 ” button first and then
press “ 2 ” and “ 4 ”.)
•If this is the channel you want, press
B
.
This DVD/VCR can receive Hyper and Oscar frequency
bands.
8) Press MENU to exit.
Note:
To confirm that a channel has been added, press
CH.
(
K
/
L
).
To Skip a Preset Channel
The channels you can no longer receive or seldom watch can
be set to be skipped when you access channels by pressing
CH.
(
K
/
L
).
• Use the remote control for this procedure.
1)
Press
VCR
, then
MENU
.
2)
Press
K
or
L
to select “INITIAL”, then press
B
.
3)
Press
K
or
L
to select “CH TUNING”, then press
B
.
4)
Press
K
or
L
to select “MANUAL”, then press
B
.
5)
Press
K
or
L
to select “POSITION”, then press
B
.
6)
Press the
number buttons
,
K
or
L
to select relevant
position number, then press
B
.
7)
Press
K
or
L
to select “SKIP”, then press
B
to select
[ON].
•To memorize the channel again, press
B
. “ON” will
change to “OFF”.
8)
Press
MENU
to exit.
Note: To confirm that a channel has been deleted, press
CH. (
K
/
L
).
Channel Reprogramming
You can replace two channels.
• Use the remote control for this procedure.
1) Press VCR , then MENU .
2) Press
K
or
L
to select “INITIAL”, then press
B
.
3) Press
K
or
L
to select “CH TUNING”, then press
B
.
4) Press
K
or
L
repeatedly to select “MOVE”, then press
B
.
5) Press
K
or
L
repeatedly to select the position number you
want to change the channel, then press
B
.
•You cannot select a position number where “- - -”
appears next to the number. This is because SKIP is set
to [ON] for this position number.
•When a weak signal is received in Channel
Reprogramming mode, you can change the background
to solid blue by pressing
C.RESET .
If you press the button again, the background will return
to the static screen.
6) Press
K
or
L
repeatedly until the channel move to another
position number, then press
B
.
Channel Plan
CH Indication TV Channel
02 – 12 E2 – E12
21 – 69 E21 – E69
74 – 78 X, Y, Z, Z+1, Z+2
80 – 99,100 S1 – S20,GAP
121 – 141 S21 – S41
142 – 153 R1 – R12
INITIAL
CH TUNING
CLOCK
RF OUT
LANGUAGE
CH TUNING
AUTO
MANUAL
MOVE
MANUAL
POSITION
CHANNEL
DECODER
SKIP
VIDEO MODE
P08
008
[OFF]
[OFF]
[SECAM]
MENU
TIMER
SET UP
INITIAL
INITIAL
CH TUNING
CLOCK
RF OUT
LANGUAGE
MANUAL
POSITION
CHANNEL
DECODER
SKIP
VIDEO MODE
P08
008
[OFF]
[ON]
[SECAM]
CH TUNING
AUTO
MANUAL
MOVE
MENU
TIMER
SET UP
INITIAL
H9779ED(EN).fm Page 11 Monday, October 25, 2004 4:21 PM