background image

Please read this manual carefully. If this desk changes hands, please provide this 
manual to the new owner.

Make sure the desk top is not touching any obstacles or walls. Make sure no obsta-
cles are in the desk’s path. Make sure all cords are an appropriate length to accom-
modate the full range of height adjustment.

Keep children away from desk components. There is risk of injury and electric shock.

Do not sit or stand on the desk frame. Do not crawl or lie under the desk frame.

Do not open or modify any of the components, including the Lifting Columns, Con-
trol Box, or Handset. Doing so risks electric shock and voids any warranty claims.

Placing objects taller than 20” underneath the desk will obstruct the desk’s move-
ment and may result in physical damage.

1

Cautions

Voltage
Converters

Use & liability

1

Using a voltage converter could cause damage to the desk and is considered im-
proper use. Resulting damage is not covered by the warranty.

Verify the voltage of the Control Box as labeled to avoid damage. Alternative voltage 
Control Boxes are available from Fully. 

This Jarvis height-adjustable desk has electric motors and is designed for use in dry 
work environments only.

This Jarvis desk is adjustable so it can be positioned at an optimal ergonomic height. 
Any extracurricular use is at user’s own risk.

Under no circumstances does the manufacturer accept warranty claims or 
liability claims for damage caused by improper use or handling of the desk frame.

Jarvis is a registered trademark of Fully, LLC. All rights reserved.

Содержание Jarvis L-shaped standing desk





























Отзывы: