21
Custom settings for
Programmable Memory Handset
Getting started
To begin, access the menu by holding down
M
for 3 seconds until
Lock/Unlock desk
appears on screen. Use the
▴
and
▼
icons to navigate through the menu.
‘1’
selects the feature you want to change and also confirms your
selection.
‘4’
takes you back to the main menu.
Lock/Unlock Jarvis
To lock Jarvis and prevent any further changes to the height or menu settings use
Lock
.
Unlock
will allow you to
once again use all of Jarvis’s features.
Max
height
If you want to limit how high your Jarvis can go, set a
Max height
limit. Simply raise Jarvis to the desired maxi-
mum height and navigate to
Max height
on the menu, then press
‘1’
to confirm.
Min height
To limit how low your Jarvis can go, set a
Minimum height
limit. Move Jarvis to the desired minimum height and
navigate to
Min height
on the menu, then press
‘1’
to confirm.
Units
Prefer to work in centimeters instead of inches? Choose the unit of measurement you’d like under the
Units
menu
option.
Anti-collision
To help prevent damage, Jarvis is outfitted with an accelerometer that stops it if it runs into something. You can
set the sensitivity with the anti-collision options.
Screen brightness
Adjust the screen brightness on your memory handset to the level that suits you—and your eyes.
Button brightness
You can also adjust the button brightness on your memory handset. Choose from 3 different brightness levels to
help you navigate through your presets and menu options.
Memory preset mode
Use
One touch
to move your Jarvis to a memory preset height with the touch of a button, or use
Constant touch
and keep your finger on the button until Jarvis gets to the memory preset height.
Calibrate height
To calibrate your handset’s height display, lower Jarvis all the way down and then use a tape measure to
determine the height from the top of your desktop to the floor. Select the
Calibrate height
menu option and use
the
▴
and
▼
icons to adjust the height readout to match your previously measured height.
