Step 23
20
Initial calibration/Reset
Before you start using your Jarvis, you’ll need to get all the parts synced.
Don’t worry — it’s easy.
Memory Handset
Programmable Memory Handset
1.
Press and hold the
▼
icon until Jarvis reaches its lowest position. Release.
2.
Press and hold the
▼
icon until the display reads
RESET
.
3.
Press and hold the
▼
icon again, this time until Jarvis first lowers slightly then
rises slightly and finally stops. Release the
▼
icon.
4.
You can now use your Jarvis.
Programming memory presets
To program your memory presets, raise or lower your Jarvis to your preferred
height. Then, press the
M
icon followed by one of the four numbers you want
to preset. This number will return Jarvis to your preferred height from now on.
