Fulgor Milano FQO 6010 P MT, Инструкция по установке и эксплуатации

Страница: 41 / 186

GB
13
- Turn the selector left/right, the hours flash.
- Modify the flashing hours value turning the selector left/right.
- Push the Temp&Time selector to switch back and forth between hours and minutes.
- Modify the flashing minutes turning left/right.
- After a few seconds the whole time of day value starts flashing: wait until the new time
of day is steady.
Push the knob to toggle between the time of day and the minute minder and check
the set values. The clock is selected by default while the symbol appears when the
minute minder is displayed.
Setting the minute minder
When the symbol is displayed, turn the knob left/right in order to set the timer value.
The standard value is 30 minutes, it’s possible to modify it in the range between 0 and
240 minutes.
This timer has no influence on the oven activities and can be set also when the oven
is off. The time of day is displayed with priority in any case, the symbol shows the
minute minder is active.
When the time expires, the symbol flashes and the buzzer sounds a warning
sequence (two short beeps repeated every 3 seconds) to recall the user attention. Push
the knob to stop it.
The buzzer stops in any case after a time-out.
TEMP & TIME
MODE