manualshive.com logo in svg

Fujitsu XG2000 Series, Руководство пользователя, Страница: 39 / 315

Поделиться
Скачать
Fujitsu XG2000 Series Скачать руководство пользователя страница 39

XG2000 series User's Guide 

39/315 

 

All Rights Reserved, Copyright (C) PFU LIMITED 2009 

4.6 Spanning Tree Protocol (STP) 

The Spanning Tree Protocol (STP) is a function that prevents loops from occurring on a network. It is also possible to provide 
network redundancy by intentionally creating a loop. 

 

STP exclusively uses only one active path between network devices, and shuts out other paths, to avoid network loops. An 
active path is selected by comparing path costs defined on each path. After the comparison, the lowest cost path will be 
selected. If the selected path becomes disabled, STP will activate the lowest cost path amongst the paths remaining.

 

The device supports IEEE802.1w RSTP (Rapid Spanning Tree Protocol). The RSTP is upward compatible with IEEE802.1D 
STP (Spanning Tree Protocol) and serves as a STP if the destination device only supports STP. 

 

 

 

Содержание XG2000 Series




























































































































































































































































































































Отзывы:

Нет отзывов