Fujitsu XG2000 Series, Руководство пользователя, Страница: 280 / 315

XG2000 series User's Guide
280/315
All Rights Reserved, Copyright (C) PFU LIMITED 2009
Appendix A Event Logs
This appendix describes event logs that are extracted from the device, including message IDs, severities, message content
details, and actions to take.
The severities of the event logs are classified into 4 levels -- CRITICAL, ERROR, WARNING, and INFO.
To display event logs, run the "
show log " command in the operator EXEC mode or in the administrator EXEC mode.
A.1 Overview of Event Logs
This section summarizes messages that are written to logs.
The message ID format is defined as described in "
Format of Log Message ".
−
Message numbers, each starting with an "S", are events that received SNMP trap notifications
−
Message numbers, each starting with a "P", are events that did not receive SNMP trap notifications
The following table lists the abbreviated function names and message numbers.
Abbreviated
function name
Message number range Description
env 0 - 999 Health monitoring
kernel 1000 - 1999 Basic control
swc 2000 - 2999 Layer 2 basic control
npm 3000 - 3299 Network protocol control
clim 3300 - 3999 Basic CLI control
xgsh 4000 - 4499 CLI command history
rstp 4500 - 4999 Rapid Spanning Tree (RSTP) control
lacp 5000 - 5499 LACP control
sys 7400 - 7499 Maintenance support function
update 7500 - 7999 Firmware update
snmp 8500 - 8599 SNMP control
ntp 8600 - 8699 NTP (Network Time Protocol) control