Fujitsu Waterstage WOYK150LJL, Руководство по установке

Страница: 50 / 83

- 50 -

Controller Menu
▼
General
Only the parameters accessible at the levels:
U - end user.
I - Commissioning
S - Specialist.
are described in this document.
The access levels are specified in the second column of
the table by means of the letters U, I and S .
The OEM parameters are not described and require a
manufacturer access code.
▼
Setting parameters
-Selecting the desired level.
-Scroll the list of menus.
-Selecting the desired menu.
-Scroll the function lines.
-Selecting the desired line.
-Adjusting the parameter.
-Validate the setting by pressing
OK .
-To return to the menu, press ESC .
If no setting is made for 8 minutes, the screen
automatically returns to the basic display.
OK
Press and release End user
OK OK OK
Time of day and date Hours / minutes 1 Time 1...24 h
User interface Day/Month 2 Minutes 0...60 min
Heating circuit 1 timer
programme
Year 3
...
Press for 3
seconds
End user Start-up Specialist OEM
Time of day and date
Hours / minutes 1
User interface
Day/Month 2
Heating circuit 1 timer
programme
Year 3
...
End date of summer time 4 01.01...31.12
End date of summer time 5
▼ Recommended settings for the parameters depending on the installation's emitters
Very Low Temperature
Radiators /
Heating-cooling floor
Low temperature
radiators
Dynamic radiators or
fan-coil heaters
Classic
temperature
radiators
Heating curve
slope
720 (CC1)
1020 (CC2)
0.25 to 0.5 0.5 to 1.25 0.4 to 1.1 1.25 to 3
Curve
displacement
721 (CC1)
1021 (CC2)
0 0 4 * 0
Min.
outgoing value
740 (CC1)
1040 (CC2)
Factory (17 °C) Factory (17 °C) 30 or 35 °C
Factory
(17 °C)
Max.
initial setpoint
741 (CC1)
1041 (CC2)
50 °C Factory (55 °C) 65 °C 65 °C
DHW charging
time limitation
5030 Factory (90 min) Factory (90 min) 40 min
Factory
(90 min)
Waterstage / Installation / 2011 - EN