Troubleshooting and tips
The wireless connection to a network does not work
Thewireless connectiontoanetwork does notwork
Cause
Troubleshooting
The wireless component is switched off.
►
Switch the wireless component on (see
"Switching the wireless components on and
off", Page 41
).
The wireless component is switched on. Despite
this, the wireless connection to a network does
not work.
►
Check whether the wireless connection is
enabled by the software.
►
Further information on using the wireless
component can be found in the help
fi
les.
The battery discharges too quickly
Battery
Cause
Troubleshooting
The battery is either too hot or too cold. In this
case the battery indicator
fl
ashes.
►
Bring the Tablet PC up/down to a normal
operating temperature again.
►
If the operating time of the battery life is
extremely short, the battery is probably too
old. Replace the battery if necessary.
You may have an application running that
consumes a great deal of power due to frequent
accessing of the hard disk or optical drive.
►
Use the AC adapter whenever possible.
The maximum brightness may have been set
for the screen.
►
Reduce the brightness of the screen to
lower energy consumption: You will
fi
nd the
setting under
Control Panel – Hardware and
Sounds – Windows Mobility Center
.
Smart Card reader is not recognized
Cause
Troubleshooting
Smart Card inserted incorrectly.
►
Make sure you have inserted your Smart
Card into the Smart Card reader with
the chip facing upwards / downwards
(device-dependent).
►
Check whether the Smart Card you are
using is supported. Your Smart Card must
comply with the ISO standard 7816-1, -2,
-3 and -4.
Smart Card PIN forgotten
Cause
Troubleshooting
PIN forgotten
►
If you work in a network, contact your
system administrator, who can unlock your
Tablet PC using a supervisor PIN.
Fujitsu
73
