Troubleshooting and tips
The Tablet PC does not start after switch on
TabletPC
Cause
Troubleshooting
The battery is not installed correctly.
►
Check whether the battery is installed
correctly in its compartment.
►
Switch the Tablet PC on.
The battery is dead.
►
Charge the battery.
or
►
Insert a charged battery.
or
►
Connect the AC adapter to the Tablet
PC.
The AC adapter is not connected properly.
►
Check whether the AC adapter is properly
connected to the Tablet PC.
►
Switch the Tablet PC on.
The Tablet PC stops working
TabletPC
Ending
Cause
Troubleshooting
The Tablet PC is in energy saving mode.
►
End energy saving mode.
An application program has caused the
malfunction.
►
Close the application program or restart
the Tablet PC (by restarting the operating
system or switching the device off and back
on again).
The battery is dead.
►
Charge the battery.
or
►
Connect the AC adapter to the Tablet
PC.
The printer does not print
Printerdoesnotprint
Cause
Troubleshooting
The printer is not switched on.
►
Make sure that the printer is switched
on and ready for operation (refer to the
documentation supplied with the printer).
The printer is not connected correctly.
►
Check that the data cable between the Tablet
PC and the printer is properly connected.
The printer driver is faulty or not correctly
installed, or it is the wrong printer driver.
►
Check that the data cable between the Tablet
PC and the printer is properly connected.
►
Check whether the correct printer driver is
loaded (refer to the printer documentation).
72
Fujitsu