Fujitsu SPARC Enterprise T5440 Server, Руководство пользователя

Страница: 15 / 92

Chapter 1 New Information About the SPARC Enterprise T5440 Server 5
When referring to the target PSU with
/SYS/PSx
command, check whether the
following part number is included in the command output.
[ALOM CMT compatible shell command]
When referring to the target PSU with
showfru /SYS/PSx
command, check
whether the following part number is included in the command output.
Workaround:
None. ILOM firmware's way of referring to the sensor is wrong. This is just an issue
of message display at the system start, and this message can be safely ignored.
Service Required LED May Turn On Due To False
Recognition of Fan Speed (CR 6989852)
ILOM firmware falsely recognizes the fan speed as "0" and the Service Required LED
may turn on. In that case, the following event log is output.
The ILOM event log example:
The
showenvironment
command output example:
fru_part_number = 3002249
/Sun_Part_Number_DataR/Sun_Part_No: 3002249
IPMI | critical: "ID = 9a : 08/17/2010 : 00:39:17 : Fan : /FB0/FM0/F0/TACH
: Lower
Non-recoverable going low : reading 0 <= threshold 2400 RPM"
IPMI | critical: "ID = 9a : 08/17/2010 : 00:39:22 : Fan : /FB0/FM0/F1/TACH
: Lower
Non-recoverable going low : reading 0 <= threshold 2400 RPM"
IPMI | critical: "ID = 9a : 08/17/2010 : 00:39:26 : Fan : /FB0/FM1/F0/TACH
: Lower
Non-recoverable going low : reading 0 <= threshold 2400 RPM"
IPMI | critical: "ID = 9a : 08/17/2010 : 00:39:30 : Fan : /FB0/FM2/F1/TACH
: Lower
Non-recoverable going low : reading 0 <= threshold 2400 RPM"
-------------------------------------------------------------------
Fan Status:
-------------------------------------------------------------------
Fans (Speeds Revolution Per Minute):
Sensor Status Speed Warn Low
-------------------------------------------------------------------