Fujitsu SPARC Enterprise M8000, Руководство по обслуживанию

Страница: 332 / 562

15-6 SPARC Enterprise M8000/M9000 Servers Service Manual • October 2012
7. From the OS, execute the
cfgadm -c unconfigure
DVD_Ap_Id command to
unconfigure the CD-RW/DVD-RW drive unit from the domain.
8. From the OS, execute the
cfgadm -a
command to verify that the status of tape drive
unit and CD-RW/DVD-RW drive unit has changed from "configured" to
"unconfigured."
9. Detach the target tape drive unit from the port.
From the terminal that is connected to XSCF, log in to XSCF, and execute the
cfgdevice -c detach -p
port no. command.
10. Confirm that the target tape drive unit is unconfigured from the domain.
From XSCF, execute
cfgdevice -l
to confirm that the relevant port is not displayed in
the current connection.
11. Connect the clip of the antistatic wrist strap and of the antistatic mat to the server
grounding port. (See Section 1.4, “Antistatic Precautions” on page 1-9 )
12. Ensure that the metallic underside of the wrist strap is in direct contact with your
skin.
The wrist strap should be snug around the wrist so that it does not rotate. (See Section 1.4,
“Antistatic Precautions” on page 1-9 )
Caution –
Before handling FRUs, be sure to connect the clip of the antistatic wrist strap
and of the antistatic mat to the server grounding port, and attach the band of the wrist strap
to one of your wrists. Place the FRUs on the grounded antistatic mat. Failure to take these
antistatic measures might result in serious damage.
# cfgadm -c unconfigure c0::dsk/c0t4d0
# cfgadm -a
Ap_Id Type Receptacle Occupant Condition
:
c0::dsk/c0t4d0 CD-ROM connected unconfigured unknown
c0::rmt/0 tape connected unconfigured unknown
: