Fujitsu PRIMERGY TX300 S7, Руководство по модернизации и обслуживанию, Страница: 529 / 898

TX300 S7 / RX350 S7
Upgrade and Maintenance Manual 529
10 Main memory
This section provides information on how to install, remove or replace memory
modules.
Safety notes
V
CAUTION!
●
Do not install unsupported third party memory modules. For further
information on supported memory modules, refer to section
"Basic
information" on page 530 .
●
Memory modules remain hot after shutdown. Wait for components to
cool down before installing or removing memory modules to prevent
burns.
●
Do not insert and remove memory modules repeatedly. Doing so may
cause failures.
●
Pressing out the securing clips on the memory module connector will
eject the installed memory module. To prevent damage and injuries
eject memory modules carefully without applying excessive force.
●
For further information, please refer to chapter "Important
information" on page 47 .
In this chapter
●
"Memory sequence" on page 530
●
"Installing memory modules" on page 538
●
"Removing memory modules" on page 542
●
"Replacing memory modules" on page 545