Fujitsu PRIMERGY TX300 S7, Руководство по модернизации и обслуживанию, Страница: 139 / 898

TX300 S7 / RX350 S7
Upgrade and Maintenance Manual 139
Basic software procedures
5.1.6 Switching on the ID indicator
When working in a datacenter environment, switch on the ID indicator on the
front and rear connector panels of the server for easy identification.
I
For further information, refer to section "Locating the defective server" on
page 60 or to the "ServerView Suite Local Service Concept (LSC)"
manual available from the ServerView Suite DVD 2 supplied with your
PRIMERGY server or online at
http://manuals.ts.fujitsu.com (EMEA
market) or http://jp.fujitsu.com/platform/server/primergy/manual/ (Japanese
market).
Using the ID button on the front panel
Ê
Press the ID button on the front panel to switch on the system identification
LEDs.
I
For further information, refer to section "Front panel controls and
indicators" on page 894 .
Using ServerView Operations Manager
Ê
In ServerView Operations Manager Single System View and press the Locate
button in the title bar to switch on the ID indicators.
5.2 Completing the maintenance task
5.2.1 Updating or recovering the system board BIOS and
iRMC
After replacing the system board, it is essential to upgrade the BIOS and iRMC
to the latest version. The latest BIOS and iRMC versions are available from the
Fujitsu support internet pages at:
http://ts.fujitsu.com/support/ (EMEA market)
http://jp.fujitsu.com/platform/server/primergy/downloads/ (Japanese market)
I
Fujitsu does not assume responsibility for any damage done to the
server or for the loss of any data resulting from BIOS updates.