Fujitsu PRIMERGY TX100 S2, Руководство по дополнительному обслуживанию

Страница: 96 / 114

96 Service Supplement
TX100 S2
Replacement routines
4.8 Replacing the system board
I
The system board can be equipped with an optional TPM (Trusted
Platform Module). This module enables third party programs to store key
information (e. g. drive encryption using Windows Bitlocker Drive
Encryption).
If the customer is using TPM functionality, the TPM has to be removed
from the defective system board and connected to the new system
board. For a detailed description, please refer to
section "Replacing the
Trusted Platform Module (TPM)" on page 104 .
The TPM is activated in the system BIOS.
Ê
Shut down the server and disconnect the AC power cord from the system.
Ê
Disconnect all external cables.
Ê
Bring the server to its horizontal position.
Ê
Remove the side cover as described in section 4.1.1.1 on page 23 .
Ê Open the HDD cage as described in section 4.1.2.1 on page 25 .
Ê Remove the air duct as described in section 4.1.4.1 on page 33 .
Ê Remove all cables from the system board.
Ê Remove the following components from the system board as shown in the
related sections:
– Heat sink: see section "Removing the processor heat sink" on page 85
I
Leave the processor on the defective board for now.
– Memory modules: refer to the PRIMERGY TX100 S2 Options Guide
– Expansion cards: refer to the PRIMERGY TX100 S2 Operating Manual
and Options Guide
I
Take a note of the controllers’ slots and cable connections.
– UFM: see section "Replacing the USB Flash Module (UFM)" on
page 109
Part number: S26361-D2779-A11-1-R791