Fujitsu PRIMERGY TX100 S2, Руководство по дополнительному обслуживанию

Страница: 11 / 114

TX100 S2
Service Supplement 11
Introduction
Information about the system board:
–
Features of the system board
– Board layout
– Jumper settings
– LED displays
– Replacing the battery
Technical Manual
Extensions and upgrades:
I
For some components only the installation
routine is described in the Options Guide.
Removing these components proceed in
reverse order.
– Expanding the main memory
– Replacing the processor / replacing the heat
sink
– Installing accessible drives
– Installing expansion cards and BBU
– Installing the TPM
– Installing the UFM
Options Guide
Cabling
Replacement routines:
–
Replacing system fans
– Replacing the front panel cable
– Replacing the front USB module
– Replacing the power supply unit
– Replacing hard disk drives
– Replacing the processor
– Replacing the system board
– Replacing the TPM
– Replacing the UFM
Service Supplement
BIOS setup "D2779 BIOS Setup
Utility for PRIMERGY
TX100 S2" manual
Information/procedure Manual
Table 1: Overview of the documentation TX100 S2